Price includes a KW Coilover Variant 1 Kit: - VW Golf 7
- Model Year: 08.2012 -
- Engine(s): 2.0 TDI 105kW | 2.0 GTD 130kW | 2.0 TDI 81kW | 1.4 TSI 103kW | 1.4 TSI 90kW | 1.6 TDI 81kW | 1.2 TSI 77kW | 1.2 TSI 63kW | 1.4 TSI 110kW | 1.4 TSI 92kW | 1.2 TSI 81kW | 1.0 TSI 85kW | 1.0 TSI 63kW | 1.5 TSI 110kW | 1.0 TSI 81kW | 1.5 TSI 96kW | 1.6 81kW | 1.8 TSI 125kW
- Front height lowers by: 35-65mm
- Rear height lowers by: 35-65mm
- Max load on front axle: 965Kg
- Max load on rear axle: 1050Kg
- EAN-Code: 4250580434436
- Item #: 10281038
- Damping adjustment: None
- Material: Inox
- Setup: Sport
- Version: Variant 1
Information & Remarks (strictly to observe):
- Including CH-Approval for inscription (Max. 40mm). DTC Approval for lowering >40mm optionally available.
- For vehicles with twist-beam rear axle only | Set FA coilover struts (incl. KW spindles), RA springs with height adjustment + dampers | For vehicles with Ø 50mm front strut diameter only | Electronic damping control needs to be deactivated for vehicles equipped with electronic damping | Deactivation kit is included in the delivery | For vehicles with DCC only
KW Variant 1 inox-line
Sporty handling combined with outstanding looks. With factory pre-configured damping
The KW coilover kit Variant 1 "inox-line" is our entry model for more driving pleasure with an attractive and individually adjustable lowering. Due to its high-quality finish, the use of struts made from stainless steel, corrosion resistant springs and bump stops as well as compatible components stands for long driving pleasure - not just the car's life.
With this KW coilover Variant 1 # 10281038 you can achieve maximum lowering in the tested adjustment range. Depending on vehicle model this varies between 30 to 70mm or 50 to 90mm. Even after years you can adjust the height quickly and easily due to the dirt resistant trapezoid thread and composite collar. Lowering at the front axle is made using our one piece composite height adjuster, on the rear axle this is the same unless the car has a seperate spring and shock absorber. The supplied rear height adjuster sits either above or below the rear spring.
- Optimally pre-adjusted
- Sporty and comfortable dampening technology
- Stainless steel technology "inox-line"
- Individually height adjustable
- tested adjustment range
- Ready to install complete solution
- High quality components for a long durability
- Complete documentation for easy handling
Setup - Factory pre-configured damping setup
The KW coilover Variant 1 "inox-line" has a vehicle-specific, fixed configured damper setup. The spring and damper match perfectly, so that you will experience an optimized balance of sportiness and comfort while driving. Even with full load and maximum axle loads, the dampers always work with a sporty characteristic. Tuning fans whose focus are "Show & Shine" events are interested in the KW Variant 1 "inox-line"