

Wheel spacers (also known as track widening spacers or spacer plates) not only improve your vehicle's driving stability and cornering behaviour, but also provide a sportier appearance. They are fitted directly onto the wheel hub, positioning the wheels further outwards so that they sit flush with the wings.

By increasing the track width, handling becomes significantly more stable: body roll is reduced and cornering behaviour noticeably improves. Even small changes of just a few millimetres have a positive effect.
In addition to the technical improvement, the visual effect is striking: the vehicle looks wider and more muscular, with a sportier presence. Ensure sufficient clearance between the wheels and the bodywork; modifications to the inner wheel arches may be necessary.
Please note: Wheel spacers always require official registration in the vehicle documents, without exception.
For the installation of NJT, H&R System DR and Powertech spacers, longer wheel bolts are required, depending on the spacer system. You can find the appropriate selection in the following category:
Browse the Wheel Bolts Category
The minimum thread engagement must be 6.5 turns for M12x1.5 bolts, 7.5 turns for M14x1.5 bolts and 9 turns for M14x1.25 bolts.

Important: A track width change exceeding 2% has not been tested. Ensure that the change remains within the permitted 2% limit; otherwise, the road traffic authority may refuse to register the modification.

For questions about certificates and approvals, please contact us on:
+41 (0)52 203 24 44