Categories

AUDI A3 SEDAN - KW COILOVER SUSPENSION KIT V1 (30-60|30-55)
Item #: [KW-GFW-1021000P]Manufacturer: KW AUTOMOTIVE

CHF1569.00 CHF1099.90

Previous
Full Overview
Next
Product 196 of 277

AUDI A3 SEDAN - KW COILOVER SUSPENSION KIT V1 (30-60|30-55)
Item #: [KW-GFW-1021000P]Manufacturer: KW AUTOMOTIVE

CHF1569.00 CHF1099.90

Previous
Full Overview
Next
Product 196 of 277
Secure Payments
Daily Customer Service
Price includes a KW Coilover Variant 1 Kit:
  • Audi A3 8V Sedan
  • Model Year: 05.2013 -
  • Engine(s): 1.2 TFSI 77kW | 1.6 TDI 77kW | 2.0 TFSI 137kW | 1.8 TFSI 125kW | 2.0 TDI 105kW | 2.0 TDI 81kW | 2.0 TDI 110kW | 1.8 TFSI 132kW | 2.0 TDI 100kW | 2.0 TDI 135kW | 1.6 TDI 81kW | 1.6 TDI 85kW | 2.0 TFSI 140kW | 30 TFSI 85kW | 35 TFSI 110kW | 30 TDI 85kW | 35 TFSI 110kW | 2.0 TFSI 162kW | 35 TDI 110kW | 40 TFSI 140kW
  • Front height lowers by: 30-60mm
  • Rear height lowers by: 30-55mm
  • Max load on front axle: 981-1080Kg
  • Max load on rear axle: 990Kg
  • EAN-Code: 4250580437178
  • Item #: 1021000P
  • Damping adjustment: None
  • Material: Inox
  • Setup: Sport
  • Version: Variant 1

Information & Remarks (strictly to observe):

  • Including CH-Approval for inscription (Max. 40mm)
  • Set FA coilover struts (incl. KW spindles), RA springs with height adjustment + dampers | Electronic damping control needs to be deactivated for vehicles equipped with electronic damping | Specific electronical damper shut-downs are available from KW. Please check our accessories list | For vehicles with Ã? 55mm front strut diameter only | For vehicles with multi-link rear axle only

KW Variant 1 inox-line

Sporty handling combined with outstanding looks. With factory pre-configured damping

The KW coilover kit Variant 1 "inox-line" is our entry model for more driving pleasure with an attractive and individually adjustable lowering. Due to its high-quality finish, the use of struts made from stainless steel, corrosion resistant springs and bump stops as well as compatible components stands for long driving pleasure - not just the car's life.

With this KW coilover Variant 1 # 1021000P you can achieve maximum lowering in the tested adjustment range. Depending on vehicle model this varies between 30 to 70mm or 50 to 90mm. Even after years you can adjust the height quickly and easily due to the dirt resistant trapezoid thread and composite collar. Lowering at the front axle is made using our one piece composite height adjuster, on the rear axle this is the same unless the car has a seperate spring and shock absorber. The supplied rear height adjuster sits either above or below the rear spring.

  • Optimally pre-adjusted
  • Sporty and comfortable dampening technology
  • Stainless steel technology "inox-line"
  • Individually height adjustable
  • tested adjustment range
  • Ready to install complete solution
  • High quality components for a long durability
  • Complete documentation for easy handling

Setup - Factory pre-configured damping setup

The KW coilover Variant 1 "inox-line" has a vehicle-specific, fixed configured damper setup. The spring and damper match perfectly, so that you will experience an optimized balance of sportiness and comfort while driving. Even with full load and maximum axle loads, the dampers always work with a sporty characteristic. Tuning fans whose focus are "Show & Shine" events are interested in the KW Variant 1 "inox-line"

This product was added to our catalog on Freitag 02 Oktober, 2020.
Currently viewing: AUDI A3 8V SEDAN - SUSPENSION - - AUDI A3 SEDAN - KW COILOVER SUSPENSION KIT V1 (30-60|30-55)