Price includes a KW Coilover Variant 1 Kit: - Audi S6 4B
- Model Year: 01.1997 - 08.2005
- Engine(s): S6 Quattro 268kW | S6 Quattro 250kW
- Front height lowers by: 40-75mm
- Rear height lowers by: 40-75mm
- Max load on front axle: 1101-1350Kg
- Max load on rear axle: 1300Kg
- EAN-Code: --
- Item #: 10210026
- Damping adjustment: None
- Material: Inox
- Setup: Sport
- Version: Variant 1
Information & Remarks (strictly to observe):
- Including CH-Approval for inscription (Max. 40mm). DTC Approval for lowering >40mm optionally available.
- Set FA + RA coilover struts | Automatic level control must be deactivated | Additional assembly parts are required from the automobile manufacturer for vehicles with self levelling control. (Audi part-no.: damper bearing 8E0 512 121 E, spring base 8E0 512 149 H, bump stop eB0 512 131Q) | In Variant 2 or 3, hardness adjustment for front axle only in not installed condition possible| For vehicles without automatic level control and/or air suspension only
KW Variant 1 inox-line
Sporty handling combined with outstanding looks. With factory pre-configured damping
The KW coilover kit Variant 1 "inox-line" is our entry model for more driving pleasure with an attractive and individually adjustable lowering. Due to its high-quality finish, the use of struts made from stainless steel, corrosion resistant springs and bump stops as well as compatible components stands for long driving pleasure - not just the car's life.
With this KW coilover Variant 1 # 10210026 you can achieve maximum lowering in the tested adjustment range. Depending on vehicle model this varies between 30 to 70mm or 50 to 90mm. Even after years you can adjust the height quickly and easily due to the dirt resistant trapezoid thread and composite collar. Lowering at the front axle is made using our one piece composite height adjuster, on the rear axle this is the same unless the car has a seperate spring and shock absorber. The supplied rear height adjuster sits either above or below the rear spring.
- Optimally pre-adjusted
- Sporty and comfortable dampening technology
- Stainless steel technology "inox-line"
- Individually height adjustable
- tested adjustment range
- Ready to install complete solution
- High quality components for a long durability
- Complete documentation for easy handling
Setup - Factory pre-configured damping setup
The KW coilover Variant 1 "inox-line" has a vehicle-specific, fixed configured damper setup. The spring and damper match perfectly, so that you will experience an optimized balance of sportiness and comfort while driving. Even with full load and maximum axle loads, the dampers always work with a sporty characteristic. Tuning fans whose focus are "Show & Shine" events are interested in the KW Variant 1 "inox-line"