Price includes a KW Coilover Variant 1 Kit:
- VW Polo 6N2
- Model Year: 10.1999 - 10.2001
- Engine(s): 1.9 D 47kW | 1.0 37kW | 1.7 SDI 44kW | 1.4 40kW | 1.4 44kW | 1.4 TDI 55kW | 1.4 16V 55kW | 1.4 16V 74kW | 1.6 16V GTI 92kW | 1.9 SDI 47kW
- Front height lowers by: 40-70mm
- Rear height lowers by: 40-70mm
- Max load on front axle: 900Kg
- Max load on rear axle: 810Kg
- EAN-Code: --
- Item #: 10280016
- Damping adjustment: None
- Material: Inox
- Setup: Sport
- Version: Variant 1
Information & Remarks (strictly to observe):
- Including CH-Approval for inscription (Max. 40mm)
- Set FA + RA coilover struts | The upper top mount is fastened to the vehicle. A) From model year 2000 top mount is fastened with 3 bolts to the chassis B) The piston rod is fastened through the centre ofthe top mount | Dampers are adjusted by easily operating adjustment wheels | Rebound is only adjustable if the top of the piston rod is accessible
KW Variant 1 inox-line
Sporty handling combined with outstanding looks. With factory pre-configured damping
The KW coilover kit Variant 1 "inox-line" is our entry model for more driving pleasure with an attractive and individually adjustable lowering. Due to its high-quality finish, the use of struts made from stainless steel, corrosion resistant springs and bump stops as well as compatible components stands for long driving pleasure - not just the car's life.
With this KW coilover Variant 1 # 10280016 you can achieve maximum lowering in the tested adjustment range. Depending on vehicle model this varies between 30 to 70mm or 50 to 90mm. Even after years you can adjust the height quickly and easily due to the dirt resistant trapezoid thread and composite collar. Lowering at the front axle is made using our one piece composite height adjuster, on the rear axle this is the same unless the car has a seperate spring and shock absorber. The supplied rear height adjuster sits either above or below the rear spring.
- Optimally pre-adjusted
- Sporty and comfortable dampening technology
- Stainless steel technology "inox-line"
- Individually height adjustable
- tested adjustment range
- Ready to install complete solution
- High quality components for a long durability
- Complete documentation for easy handling
Setup - Factory pre-configured damping setup
The KW coilover Variant 1 "inox-line" has a vehicle-specific, fixed configured damper setup. The spring and damper match perfectly, so that you will experience an optimized balance of sportiness and comfort while driving. Even with full load and maximum axle loads, the dampers always work with a sporty characteristic. Tuning fans whose focus are "Show & Shine" events are interested in the KW Variant 1 "inox-line"